Filter
Top Products
- 9 -
CLEANING INSTRUCTIONS
CLEANING (Always unplug unit)
ANY SERVICING REQUIRING DISASSEMBLY, OTHER THAN THE CLEANING DESCRIBED
BELOW, SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
• Avoid using any cleaning agents other
than dish detergent.
• Do not use steel wool or other abrasive
materials.
• Do not wash any parts in the
dishwasher.
• Wipe the shaft with a soft cloth or sponge
to prevent damage to the seal packing.
Allow to dry before storing the pan inside
the bread machine.
• It is not necessary to remove the kneading
blade for cleaning. But if you wish to, it
must be removed after each use.
• To remove, fill the pan with hot soapy
water and allow it to soak for 20 minutes.
Wash it with a soft brush or cloth and dry
thoroughly.
• Do not use metal utensils inside the
machine. They will damage the non-stick
coating. If the bread sticks to the lid, use a
plastic pancake turner to clean.
NOTE: The non-stick coating may change
color over time. This is caused by moisture
and steam and in no way affects performance.
• Wipe the exterior with a damp dishcloth
after each use.
• Do not immerse in or splash with water.
• After using, cool and wipe out the oven
interior with a damp dishcloth or plastic
scouring pad.
• Do not immerse the bread pan in water.
Wipe clean with a damp cloth, then dry
thoroughly.
• Do not place bread pan in conventional
oven.
STORING
• Be sure bread machine is completely cooled before storing.
• All removable parts should be thoroughly cleaned and dried.
• Store bread machine with lid closed.