Filter
Top Products
NEW CLR2060 CONTROL BOARD DESIGN
Models Manufactured After 12/1/03
U-Line has started manufacturing the CLR2060 with a revised electronic control board. The new control
board design is similar to the control board used on the CLRCO2075 Clear Ice Maker/Refrigerator.
This new board will have the advanced diagnostics that the CLRCO board has and the components can be
tested in the same manner. This features a diagnostic LED and has 2 thermistors, one on the liquid line and
one in the bin.
Note: The new board is NOT interchangeable in units with the original board. Also, in the case of a
defective board, the board must be changed along with the thermistors, since they are matched to the
board.
There is no display box installed on the CLR2060, however a display box from the CLRCO2075 will fit on
this board. It can be used to read the bin temperature and the liquid line temperature.
The board is mounted in the lower front section of the CLR2060 Clear Ice Maker and is accessed by
removing the service panel.
E-SP-002
E_SP-001
INTRODUCTION
97
Design
■
Features
■
Performance