Filter
Top Products
– 17 –
DOOR SWITCH
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove the top front cover as outlined under
Covers and Panel.
2. Disconnect the lead wires to the door switch.
GLASS
GLASS
REMOVE
SCREWS
INNER DOOR PANEL ASSEMBLY
PL-56053
2. Remove the door handle, then remove the
outer door panel.
3. Lift out the inner door panel window assembly.
4. Remove the door seal from the inside of the
left door only.
5. Remove the screws securing the window
tabs to the door bracket and lift the window
assembly out from the door frame.
6. Reverse procedure to install the replacement
window.
3. Remove the switch.
4. Reverse procedure to install the replacement
switch and check for proper adjustment as
outlined in Door Switch under Service
Procedures and Adjustments.