Filter
Top Products
– 17 –
ENTER DOWN UP
— —
0 0
ENTER DOWN UP
— —
0 0
To COPY an existing program to a
NEW
program number —
Recall and display the program number that you wish to copy.
Press
to begin the program. Pause. Press to stop the
program.
Change the program number to the
NEW
number.
Press until the beep sounds, indicating the program has been
copied.
To C
HANGE a program —
With — — in the program number display, the control is in Non-
Program mode.
Press the
key. Program number 00 is displayed. Use the UP or
DOWN arrows to increase or decrease until the program number you
want to change is displayed.
Step through each phase, making any temperature, time or other
changes for the phase; press
to shift to the next phase. The
program number begins to blink when one or more changes have been
made to the program.
To S
AVE the changed cooking program, press and hold it in for
about three seconds until the beep sounds.
RECALLING A PROGRAM FROM MEMORY
Once a menu item has been programmed, it can be recalled, reviewed and used to cook food.
If the Program has already been programmed, its values are recalled from memory and displayed. You
can view all the programmed information by stepping through the phases using the phase button.
To R
ECALL a program from memory —
With — — in the program number display, the control is in Non-
Program mode.
Press the
key. Program Number 00 is displayed. Use the UP
or DOWN arrows to select the program number you want.
Use the Phase 1 – 5 key to step through and verify the cooking
parameters for each phase of the cooking program.
Load the oven. If using the probe, place it in the center of the product.
Close the door and press
to begin the cooking program. The
blinking indicator light in the Phase 1 – 5 key shows which phase of the
cooking program is being performed. If the program is timed, the
display shows the total time remaining. When the cooking program is
done, the buzzer will sound.
Press
to silence the buzzer. Check the product for doneness.