Vulcan-Hart VCG10H, VCG10F, VCG20H, ML-126836, ML-126837, ML-126838 Oven User Manual


 
– 22 –
COMBI (Convection Baking with Steam)
Combi baking with steam is used for baking, roasting or braising when steam needs to be added to the
oven during a convection baking operation. The Steam Factor can be varied by repeat pressing of the
Combi key — see Steam Factor in the table below. It is recommended that you preheat the oven.
Automatic Combi baking with steam can be set up so the buzzer sounds when the Cooking Time has
elapsed or when the product's internal temperature has reached the Probe Temperature set point. If
using the Probe Temperature, insert the probe near the center of the product. Cooking Time is not used
when the Probe Temperature is in use.
Usually, the Cooking Time and Oven Temperature are used to control Combi baking with steam.
Alternatively, the Probe Temperature can be used to indicate when cooking is done. When using the
Probe Temperature, either the Oven Temperature or
can be used to control the oven.
Turn the oven ON.
Select Combi Mode and set the Steam Factor (see table below).
*
For
standard automatic
Combi baking with steaming, set the Oven
Temperature and the Cooking Time.
To set the Cooking Time, press
and use the UP and DOWN
arrows.
To set the Oven Temperature, press
and use the UP and
DOWN arrows to adjust the setting.
For
final probe temperature
Combi baking with steaming, set the
Probe Temperature.
To set the Probe Temperature, press
and use the UP and
DOWN arrows. When the Probe Temperature indicator is lit, the
numeric value in the time display is the Probe Temperature in °F.
Probe Temperature can be used with either
or .
When the control is set, load the oven. If using the probe, place it
in the center of the product. Close the door and press
to begin.
Upon completion of the Combi baking with steaming process, when
either the Cooking Time has counted down or the Probe Temperature
has been reached, the buzzer will sound.
Press
to silence the buzzer. Check the product for doneness.
* When selecting Steam Factor, press 1 to 6 times to obtain the desired steaming.
Indicator Lights Combi Key Steam Factor
❍●●●●● Pre-selected. 20
❍❍●●●●
Press one time. 30
❍❍❍●●● Press two times. 40
❍❍❍❍●● Press three times. 50
❍❍❍❍❍● Press four times. 60
❍❍❍❍❍❍ Press five times. 70
hmin
TIME DOWN UP PROBE
135
hmin
TIME DOWN UP PROBE
170
TEMP DOWN UP
325
F