Filter
Top Products
Application 3 Watlow MINICHEF 2000 ■ 23
Application 3
Automatic Cook-&-Hold
Oven
One Heat Channel, Six Menus
Introduction to Application 3 . . . . . . . . . . . . . . 23
Configuration Mode Quick Reference . . . . . . . . 25
Program Mode Quick Reference. . . . . . . . . . . . 26
Step 7 Design a Faceplate Overlay . . . . . . . . . . 27
Step 8 Operate the Controller . . . . . . . . . . . . . 28
Application 3 allows you to program as many as six menu keys, each of which can con-
trol one temperature channel, a fan and cooking time for an automatic cook-&-hold
oven.
Overview of Key Steps
1. Install the MINICHEF 2000.
2. Wire the controller.
3. Configure the controller.
4. Program the menus.
5. Set the controller security.
6. Set the Real-time Clock.
For instructions on Steps 1, 2, 3, 4, 5 and 6, see the Hardware & Software Setup Guide.
7. Design, manufacture and apply faceplate overlay for end-users. (For a suggested
design to suit this application, see this section. For overlay dimensions and guide-
lines, see the Hardware & Software Setup Guide.)
8. Operate the controller. (See this application guide.)
3