Filter
Top Products
44 ■ Watlow MINICHEF 2000 Application 5
Key Functions in Configuration Mode
Key Functions in Operation Mode
Summary of Input/Output Functions
Note: For details, see wiring instructions in the
Hardware & Software Setup Guide.
Heat
1
Temp(s)
2
Time(s)
4
5
Start/
Stop
6
Down
Your Company Logo
3
Up
Input 1 Oven Temperature →
Input 2 Probe Temperature →
Event Input 1 Door Open →
Event Input 2 not used →
→ Output 1 Heat
→ Output 2 not used
→ Event Output 1 not used
→ Event Output 2 Timer Output
→ Output 5 Audible Alarm
Hold
Temp
Heat
1
Temp(s)
2
Time(s)
4
5
Start/
Stop
6
Down
Your Company Logo
3
Up
Temp(s) Set or display
temperatures. Lights flash
rapidly if editing
parameters during menu
operation.
Time(s) Set Times. Lights
flash rapidly if editing
parameters during menu
operation.
Hold Temp Set or display
hold temp. Lights flash
rapidly if editing
parameters during menu
operation.
Start/Stop Activate, pause
or cancel active menu.
Heat Indicator Light
Lit when heat output is on.
Increment
Start/Stop Indicator Light
Slow flash...Preheating
Rapid flash...Ready
Lit...Cooking
Off...Done
Decrement
Hold
Temp
AB
DE
GH
Enter
EscapeHome
Edit
C
F
MINICHEF 2000
Display five-digit, seven-
segment numeric LED
display.
Indicator lights
(1 for each key, 2 for heat
channels).
Edit key (A) Access the
next level of parameters or
values.
Enter key (B) Enter the
value and return to
previous level.
Home key (D) Move to
Operation Mode with a
two-second key press.
Up key (C) Move up the
lists.
Escape key (E) Return to
original value when editing
a parameter value.
Down key (F) Move down
the lists.