Filter
Top Products
Page 1-15
1-15
Cooking Products Service Manual
Original July, 1996 4321891
© 1996 Whirlpool Corporation
CONVERTING THE OVEN BURNERS FOR L.P. GAS
screws
3. Remove the screws from the heat shield over
the bake burner and remove the shield.
pin
hood
Natural gas L.P. gas
increases decreases flame
flame size in size in this direction
this direction
orifice hood bake burner
4. Use a
1
/2
"
combination wrench and turn the
orifice hood at the base of the bake burner
clockwise until it is just snug (approximately
2-
1
/2 turns). NO NOT OVERTIGHTEN THE
HOOD.
heat shield
screws
THE BROIL BURNER
1. Remove the oven racks.
2. Remove the two screws (shown in the illustra-
tion) from the broil burner and lift the burner
off the orifice hood.
THE BAKE BURNER
1. Remove the oven racks.
2. Remove the two screws from the oven floor
and remove the floor.
orifice hood
broil burner
hood
Natural gas L.P. gas
increases decreases flame
flame size in size in this direction
this direction
pin
3. Use a
1
/2
"
combination wrench and turn the
orifice hood at the base of the broil burner
clockwise until it is just snug (approximately
2-
1
/2 turns). NO NOT OVERTIGHTEN THE
HOOD.
screw
screw