Filter
Top Products
3-20
4. Pull the knob off the control shaft (if present).
REMOVING THE ELECTRONIC OVEN CONTROL
WARNING
OVEN CONTROL
CONSOLE PANEL
CONTROL KNOB
OFF
PUSH TO
TURN
PUSH TO
TURN
WARM
200
250
350
400
450
450
500
300
CLEAN
BROIL
OVEN ON
OVEN HEATING
DOOR LOCKED/CLEANING
5. Without disconnecting any wires, remove the
mounting screws from the electronic oven
control and remove it from the back of the
console.
OVEN CONTROL
CONSOLE PANEL
MOUNTING
SCREWS
6. Mount the new electronic oven control to the
upper console and install the knob (if appli-
cable) on the control shaft.
7. Unplug the connectors from the old oven
control, and reconnect them to the new oven
control at the same callout (P1, P2, etc.)
location.
8. Reassemble the range.
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
1. Pull the range away from the wall so that you
can access the back.
2. Turn off the gas to the range and disconnect
the power cord from the wall outlet.
3. From behind the range, remove the upper
access cover.
REMOVE UPPER
ACCESS COVER
OVEN CONTROL
UPPER CONSOLE