Whirlpool RF386PXD Range User Manual


 
The electronic oven control
Electronic
Timer set and
display
off pads
(p.
14)
Clock pad
(P. 13)
Manual oven
- light pad
(P. 46)
- Off/cancel pad
(P. 15)
Oven
selector
pads
Temperature
Electronic Hour Minute Start/enter
pads
MEALTIMERTM pads pads
pad (P. 15)
control pads
(P. 22)
Display/clock
l
When you first plug in the range, every-
thing on the display will light up for l-2
seconds, then a time of day and “PF” will
appear on the temperature display. If, after
you set the clock (page 13), “PF” again
appears on the display, your electricity
was off for a while. Reset the clock.
l
When you are not using the oven, the
control is an accurate clock.
l
When you are using the oven or Minute
Timer, the display will show times, temp-
erture settings, and what command pads
have been pressed.
l
When showing the time of day, the
display will show the hour and minutes.
l
When you are using the Minute Timer,
the display will show minutes and seconds
in the following sequence:
- For settings from 1-59 minutes, the
display will count down each second.
- For settings 1 hour or over, the display
will count down each minute.
l
When you are using Cook Time and/or
CID
Stop Time, the display
COOK
STOP
will show hours and
TIME
TIME
minutes.
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Clock tells the oven you are going to set
0
the clock.
CLOCK
-Off/Cancel tells the oven to turn off.
Each command pad (except Off/Cancel and
Start/Enter) has its own Indicator Light. The
Indicator Light comes on when you press
the command pad.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
command pads.
NOTES:
l
Control lock is only available when oven
is not in use or control has not been set.
l
Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
12