Filter
Top Products
5. Set start time.
Press the “up” (A) or “down” (V) pad(s)
until the correct time shows on the
display.
Example at right shows a desired
start time of 2:O0.
PRESS
(example shows 2 o’clock
start time)
6. Press Stop Time pad.
PRESS
YOU SEE
7. Set stop time.
Press the “up” (A) or “down” (V)
pad(s) until the correct time shows on
the display.
Example at right shows a desired
stop time of 2:30. This provides a 30-
minute cook time (the difference
between the start and stop times).
NOTE: If you do not set a stop time,
the colon will flash on the display and
STOP and COOK will flash alternately
to remind you to program a stop time
or a cook time. (See page 26 for
instructions on how to set delay start
and stop automatically using Cook
Time and Delay Start Time.)
PRESS
YOU SEE
(example
shows 2:30 stop time)
8. Complete entry.
NOTES:
l You can change the temperature or
time settings any time after pressing
the Start/Enter pad by repeating
Steps 2 through 8.
l The dlsplay will show “door” and a
tone will sound once every 5 seconds
if the door is latched (Lock Lever set
at the clean position) when you try to
bake/roast.
PRESS YOU SEE
continued on next page
29