Whirlpool RF386PXD Range User Manual


 
To lock or deactivate the control panel: To unlock the control panel:
Press and hold the Start/Enter pad for 5 Press and hold the StarVEnter pad for 5
seconds. A single tone will sound
seconds. A single tone will sound
and “Lot” and fi will appear on the
and “Lot” and fi will disappear
temperature display. When the
from the temperature display.
control is locked, “START?” will
appear on the display and three tones will
sound if you press any command pad.
Setting the clock
NOTE: If you do not want the clock time
displayed, press and hold the Clock pad for
5 seconds. To display the clock time again,
press and hold the Clock pad for 5 seconds.
You should not have to reset the time.
1. Press Clock pad.
2. Set time.
Press the “up” (A) or “down” (V) pad(s)
until the correct time shows on the
display.
PRESS YOU SEE
(example for 530)
3. Start clock.
13