Filter
Top Products
To cancel the Minute Timer:
Press Timer Off pad.
PRESS
YOU SEE
(time of day)
Starting a function
After programming a function, you must
press the Start/Enter pad to start
the function. If you do not press
the Start/Enter pad within 5
seconds of programming,
‘START?” will show on the display
as a reminder.
Canceling a function
The Off/Cancel pad will cancel any function
D
except for the Clock and Timer
l
Set functions. When you press the
Off/Cancel pad, the display will
show the time of day or, if
Minute Timer is also being
used, the time remaining.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off all signals except for the
end-of-timer and error tones:
Press and hold the Stop Time pad for 5
I\ seconds. A short tone will sound
I I
STOP
to tell you the signals have been
TIME
changed.
Repeat the above step to turn the signals
back on.
To choose between high and low volume
signals:
Press and hold the Delay Start Time pad for
5 seconds. A short tone will
sound to tell you the signals
have been changed. Either “HI”
or “LO” will appear on the time
display to show the volume
you chose.
15