Filter
Top Products
15628-9-1007Page 20
Special Venting Components (Simpson Duravent)
See Empire Comfort Systems, Inc. Retail Price List for Simpson
Duravent part numbers and pricing.
Installing Vent Components (Figure 22 and Figure 23)
Begin the vent system installation by installing the first Simpson
Duravent component, a straight pipe on the top of the appliance,or
rotate the vent elbow to the horizontal positon then add horizontal
and vertical pipe lengths and then a horizontal or vertical termination
kit. Elbows can be added where neccessary. See Pages 15 through
17 for venting requirements.
Simpson Duravent vent system components lock into place by
sliding the concentric pipe section with four (4) equally spaced
interior beads onto the appliance collar or previously installed
component end with four (4) equally spaced indented sections.
When the internal beads of each starting 6-5/8 inch outer pipe line
up, rotate pipe section clockwise 90° (approximately 3 inches).
The vent pipe is now locked together.
Continue adding components per the pre-planned vent system
configuration. Be certain that each succeeding vent component
is securely fitted and locked into the preceding component in the
vent system.
Figure 22
Figure 23
VENT SYSTEM IDENTIFICATION