Filter
Top Products
Software
30
User Manual WMF presto
Display Contrast
Contrast of the display is set here.
(Default value is 70)
Filter/Softener Fitted
Whether filter is fitted or not is entered here.
This affects the descaling intervals.
Water Hardness/Capacity
On plumbed coffee machines with a constant water
supply (without anti-scale filter, optional) and coffee ma-
chines with a water tank the water hardness (carbonate
hardness) is set here.
With fitted filter and constant water supply:
Filter capacity is set here.
(Filter capacity can be found in the anti-scale filter docu-
mentation.)
Warm-Up Rinse
Here enter the setting as to whether the coffee machine
should rinse out the brewing unit with hot water after
heating up.
Recommended setting: active.
Warm Up button
Here enter the setting as to whether the Warm Up Button
is to show on the Readiness State display.
Introduction
The Introduction program is started here.
If customers are to operate the
coffee machine themselves the
Warm Rinse Button should be
set to ”inactive”.
Contrast
Filter/Softener
Water Hardn.
Capacity
Warm-Up Rins.
Warm Up button
Introduction