Filter
Top Products
Customer Care
38
User Manual WMF presto
Remove residual coffee grounds using a paint-brush
or scrubber.
Rinse brewing unit under running water.
Never clean the brewing unit in a dishwasher and never
use any cleaner additives.
Dry off brewing unit with a cloth. Allow to dry
completely before replacing in the coffee machine.
Remove coffee ground residues in the chute. For this
withdraw drip tray and wipe out the coffee grounds
towards the front or suck out using a vacuum cleaner.
Reinstall the dry brewing unit.
Replace springs in insertion unit (Picture 5).
Hold the pusher compressed and replace the brewing
unit in the chute against rear wall.
Push brewing unit upwards until it engages in the lock.
Replace coffee grounds container and close chute
cover.
If the brewing unit cannot be replaced without resist-
ance: turn thread on brewing unit head slightly to the left
or right until the brewing unit slides into the guide.
Never use force!
Picture 4
Picture 3
Picture 5
Brewer sieve