Appendix: Quick Reference Overview
57
User Manual WMF presto
Order number 33 2319 8010
Edition 1.03 - 10.05
1
2 3
Touch clear pad. Additional pads are activated.
Touch
pad.
Touch
(Customer Care).
4 5 6
The Menu (Customer Care) ap-
pears with three options.
Touch
Cleaning Prog. .
Touch switching off Touch Start
Cleaning Program sequence begins.
7 7.1 8
Open bottle of Special Cleaner.
Mix 5 ml cleaner with 0.3 l warm water
in a container. Insert milk hose.
When Step 7 completed
touch
Yes .
Cleaning runs for 30 secs.
9 10 11
For water rinse fill with 0.3 l of clear,
cold water. Insert milk hose.
Touch
Yes .
Rinse runs for 30 secs.
Display with foamer cleaning
reminder appears.
For foamer cleaning see next page,
steps A to C. Touch
OK .
12 13
Touch Start
Machine cleaning starts.
Empty grounds container and drip
tray. See steps 14 to 17.
If not connected to mains drainage
place receptacle (2 litres) underneath.
Continue on reverse side.
Quick Reference “Daily Cleaning”
This Quick Reference does not replace the User Manual!
Consider the Overview of Cleaning Interval Schedule in chapter “Customer care” in the User
Manual. Prior to the first cleaning read the User Manual, Customer Care chapter under sub-
heading: “General Cleaning”, “Weekly Cleaning” “Regular Cleaning” and “Descaling”.
14 15 16
Push combi spout fully upwards and
lift the adjustable screen.
Remove and empty
grounds container.
Pull drip tray out and empty. Then
replace drip tray. Obligatory with
machines without mains drain
connection!
17 18 19
Replace grounds container and close
adjustable screen.
Manual insert is either in the centre
between the product containers or in
the centre behind the containers.
Close manual insert.
20 21 22
Cleaning tablet inserted?
Touch
Yes
Cleaning runs for approx. 5-8 mins Mixer rinse runs for 30 secs then
machine switches off. Cleaning
routine ended.
Foamer Cleaning Mixer Rinsing
Foamer Cleaning only
On
submenu (Customer Care)
touch
Foamer Cleaning .
See steps 6 to 11.
Mixer Rinsing only
On
submenu (Customer Care)
touch
Mixer Rinsing
Mixer rinse runs for 30 secs.
Combi spout cleaning 1 x daily Prior to cleaning switch off at ON/OFF button. Pull out mains plug.
A B C
Pull forward the little lever behind the
combi spout. Remove combi spout,
remove milk hose from milk container
and release from combi spout.
If a mixer hose is fitted remove it too.
Mix 5 ml Cleaner with 0.5 l warm
water in a receptacle. Dismantle
combi spout and soak together with
milk hose for a minimum of 5 hrs
in the cleaner fluid. Parts must be
completely immersed. Finally clean
all parts thoroughly with a brush.
Rinse combi spout and milk hose
very thoroughly with clear water
so that no cleaner fluid remains.
Replace combi spout and hoses after
rinsing.