A SERVICE OF

logo

Open as PDF
next previous
Command Line Interface (CLI) AP-700 User Guide
Configuring the AP using CLI commands
190
Example:
[Device-Name]>set secprofiletbl 5 secmode wpa status enable
Configure a Security Profile with WPA-PSK Security Mode
[Device-Name]>set secprofiletbl <index> secmode wpa-psk passphrase <value> status enable
Example:
[Device-Name]>set secprofiletbl 6 secmode wpa-psk passphrase 12345678 status enable
Configure a Security Profile with 802.11i Security Mode
[Device-Name]>set secprofiletbl <index> secmode 802.11i status enable
Example:
[Device-Name]>set secprofiletbl 7 secmode 802.11i status enable
Configure a Security Profile with 802.11i-PSK Security Mode
[Device-Name]>set secprofiletbl <index> secmode 802.11i-psk passphrase <value> status
enable
Example:
[Device-Name]>set secprofiletbl 8 secmode 802.11i-psk passphrase 12345678 status enable