Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
201
** Each 802.11 packet is acknowledged by the receiving station. On links longer than about 100m, the time that it takes for the ACK to get back
to the sending station is long enough to cause the sending station to believe that the packet was not properly received. This problem can be
corrected by adjusting the AP Link Length parameter to a value that is larger than the length in meters of the longest link being serviced by
that AP.
802.11a Specific Parameters
* Available for the 5 GHz frequency band in the FCC regulatory domain only.
† Super mode must be enabled before Turbo mode can be enabled.
Distance Between
APs
Receive Sensitivity
Threshold (dBm)
Transmit Defer Threshold
(dBm)
Large -96 -62
Medium -86 -62
Small -78 -52
Mini -70 -42
Micro -62 -36
Name Type Value Access CLI Parameter
Operating Frequency
Channel
Integer Varies by regulatory domain and
country. See Available Channels
RW channel
Supported Data Rates Octet String See Transmit Rate, below R suppdatarates
Transmit Rate Integer32 0 (Auto Fallback)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW txrate
Physical Layer Type Integer ofdm (orthogonal frequency division
multiplexing)
Rphytype
Regulatory Domain List DisplayString Varies by regulatory domain:
USA -- FCC
Hong Kong -- HK
Australia -- AU
Europe -- ETSI
Russia -- RU
Japan -- TELEC
Singapore -- IDA
Taiwan -- TW
China -- CN
Asia
Brazil
Argentina
Saudi Arabia
World Mode -- WO
Undefined
R regdomain
Super Mode Integer enable
disable (default)
RW supermode
Turbo Mode*
†
Integer enable
disable (default)
RW turbo
