Installation and Initialization AP-700 User Guide
Initialization
32
If the operation is successful, you will receive a confirmation message.
7. Reboot the AP as follows:
• Click Commands > Reboot.
• Enter 0 in the Time to Reboot field.
• Click OK.
Install Software with TFTP Server
A Trivial File Transfer Protocol (TFTP) server allows you to transfer files across a network. You can upload files from the
AP for backup or copying, and you can download the files for configuration and AP Image upgrades. The Solarwinds
TFTP server software is located on the AP Installation CD-ROM. You can also download the latest TFTP software from
Solarwind’s Web site at http://www.solarwinds.net. The instructions that follow assume that you are using the Solarwinds
TFTP server software; other TFTP servers may require different configurations.
NOTE: If a TFTP server is not available in the network, you can perform similar file transfer operations using the HTTP
interface.See Update AP via HTTP.
After the TFTP server is installed:
• Check to see that TFTP is configured to point to the directory containing the AP Image.
• Make sure you have the proper TFTP server IP address, the proper AP Image file name, and that the TFTP server is
operational.
• Make sure the TFTP server is configured to both Transmit and Receive files (on the TFTP server’s Security tab), with
no automatic shutdown or time-out (on the Auto Close tab).
The following types of files can be downloaded to the AP from a TFTP server:
• Config (configuration file)
• Image (AP software image or kernel)
• UpgradeBspBl (BSP/Bootloader firmware file)
• SSL Certificate
• SSL Private Key
• SSH Public Key
• SSH Private Key
• CLI Batch File
Install Updates from your TFTP Server using the Web Interface
1. Download the latest software from http://support.proxim.com. See Download the Software for instructions.
2. Copy the latest software updates to your TFTP server.
3. In the Web Interface, click the Commands button and select the Download tab.
4. Enter the IP address of your TFTP server in the field provided.
5. Enter the File Name (including the file extension). If the file is located in the default TFTP directory, you need enter
only the file name. Otherwise, enter the full directory path and file name.
6. Select the File Type from the drop-down menu (use Img for software updates).
7. Select Download & Reboot from the File Operation drop-down menu.
8. Click OK. The Access Point will reboot automatically when the download is complete.
Install Updates from your TFTP Server using the CLI
1. Download the latest software to http://support.proxim.com. See Download the Software for instructions.
2. Copy the latest software updates to your TFTP server.
3. Open the CLI interface via Telnet or a serial connection.
