A SERVICE OF

logo

Open as PDF
next previous
Advanced Configuration AP-700 User Guide
Interfaces
59
Figure 4-15 Adding WDS Links
6. Select which encryption method to use (if any) from the WDS Security Mode drop-down menu.
7. If you selected a WDS Security Mode, do one of the following:
• If you selected WEP: Enter an encryption key.
• If you selected AES: Enter a shared secret.
8. Enter the MAC Address that you wrote down in Step 2 in one of the Partner MAC Address field of the Wireless
Distribution Setup window.
9. Set the Status of the device to Enable.
10.Click OK
.
11.Reboot the AP.
Ethernet
Select the desired speed and transmission mode from the drop-down menu. Half-duplex means that only one side can
transmit at a time and full-duplex allows both sides to transmit. When set to auto-duplex, the AP negotiates with its switch
or hub to automatically select the highest throughput option supported by both sides.