Chapter 2: Installing your interactive flat
panel
Environmental requirements 11
Wall-mounting your interactive flat panel 12
Important mounting considerations for trained installers 13
Choosing a mounting location 13
Choosing a mounting height 14
You require a team of professional installers equipped with a lifting device to install your
SMARTBoard 8070i interactive flat panel.
This chapter provides additional considerations and details for installing your interactive flat panel.
I MP OR TA N T
Because the receptacles might not be accessible after wall-installation, consider connecting cables
for speakers, computers and peripheral devices while the interactive flat panel is still in its
packaging or is suspended from a lifting device. For more information, see Connecting computers
and peripheral devices on page 15.
Environmental requirements
Before installing your interactive flat panel, review the following environmental requirements. For
more detailed information, see SMART Board 8070i and 8070i-SMP interactive flat panel
specifications (smarttech.com/kb/155318) or SMART Board 8070ie-SMP interactive flat panel with
appliance specifications (smarttech.com/kb/170078).
Environmental requirement Parameter
Power requirements .2A–3.7A at 100V–240V AC, 50 Hz–60 Hz
Power consumption at 77ºF
(25ºC)
Typically up–530 W (brightness at 70% and volume at 40),
maximum 580 W (brightness and volume at maximums)
Chapter 2
11
