Schedule settings
Menu item Function
OFF TIMER Sets the time from the last input to when the interactive flat panel
automatically turns off. You can set this from 1–24 hours.
SCHEDULE SETTING
Creates aschedule for the interactive flat panel to use.
I MP OR TA N T
You must set the date and time values before you can set a schedule.
SCHEDULE LIST Displays the interactive flat panel’s schedules.
DATE & TIME Sets the date, time, time zone and daylight savings time.
SCHEDULE RESET Restores the schedule settings to their default values.
PIP (Picture in Picture) settings
Menu item Function
KEEP PIP MODE Enables the interactive flat panel to remain in PIP and TEXT TICKER
modes after it’s turned off and turned on again.
PIP MODE Sets the sub-picture mode to PIP, POP, SBS aspect or SBS full.
PIP SIZE Selects the size of the sub-picture used in PIP mode.
PIP POSITION Determines where the PIP appears on the screen.
ASPECT Selects sub-picture aspect. Options are FULL, NORMAL, WIDE and
ZOOM.
TEXT TICKER Allows text insertion in main screen with the ability to adjust.
SUB INPUT Selects sub-picture input signal.
PIP RESET Restores the PIP settings to their default values.
OSD settings
Menu item Function
LANGUAGE Selects the language used by the OSD menu.
OSD TURN OFF Turns off the OSD menu after a period of inactivity. The preset choices
are 10–240 seconds.
OSD POSITION Sets where the OSD menu appears on the screen to Left or Right.
INFORMATION OSD Selects if the Information OSD menu is displayed.
MONITOR
INFORMATION
Displays interactive flat panel information.
A PPEN DI X A
Adjustingvideosettingswiththeon-screendisplaymenu
78
