Filter
Top Products
B-17
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Appendix B Site-to-Site VPN User Interface Reference
Create VPN Wizard
• Clicking OK on any tab in the dialog box saves your definitions on all the
tabs.
Navigation Path
You can access the Edit Endpoints dialog box from the Endpoints Page, page B-13
(or tab). Then select a device in the Endpoints table, and click Edit.
Related Topics
• Endpoints Page, page B-13
• Defining the Endpoints and Protected Networks, page 9-18
• Configuring Dial Backup, page 9-28
• Configuring a Catalyst VPN Services Module (VPNSM) VPN Interface,
page 9-30
• Configuring a Catalyst VPN Shared Port Adapter (VPN SPA) Blade,
page 9-32
• Configuring a Firewall Services Module (FWSM) Interface with VPNSM or
VPN SPA, page 9-38
• Configuring VRF-Aware IPSec Settings, page 9-45
VPN Interface Tab
Note If you selected a Catalyst 6500/7600 device in the Endpoints table for editing, the
VPN Interface tab provides settings that enable you to configure a VPN Services
Module (VPNSM) or a VPN SPA blade on the device. For more information, see
Defining VPN Services Module (VPNSM) or VPN SPA Settings, page B-21.For
a description of the elements that appear on the VPN Interface tab for a Catalyst
6500/7600 device, see Table B-8 on page B-22.
Use the VPN Interface tab in the Edit Endpoints dialog box to edit the VPN
interfaces defined for devices in the Endpoints table. When defining a primary
VPN interface for a router device, you can also configure a backup interface to
use as a fallback link for the primary route VPN interface, if its connection link