Filter
Top Products
Appendix B Site-to-Site VPN User Interface Reference
Create VPN Wizard
B-22
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Note • Before you define the VPNSM or VPN SPA settings, you must import your
Catalyst 6500/7600 device to the Security Manager inventory and discover its
interfaces. For more information, see Procedure for Configuring a VPNSM or
VPN SPA Blade, page 9-34.
• If you are configuring a VPNSM or VPN SPA with VRF-Aware IPSec on a
device, verify that the device does not belong to a different VPN topology in
which VRF-Aware IPSec is not configured. Similarly, if you are configuring
a VPNSM or VPN SPA without VRF-Aware IPSec, make sure that the device
belongs to a different VPN topology in which VRF-Aware IPSec is
configured.
Field Reference
Table B-8 describes the elements that appear on the VPN Interface tab of the Edit
Endpoints dialog box, after you select a Catalyst 6500/7600 device.
Table B-8 Edit Endpoints Dialog Box > VPN Interface Tab > VPNSM/VPN SPA Settings
Element Description
Enable the VPN Interface
Changes on All Selected Peers
Available if you selected more than one Catalyst 6500/7600 device
for editing in the Endpoints page.
When selected, applies any changes you make in the VPN interface
tab to all the selected devices.
VPNSM/VPN SPA Settings
VPN Interface The inside VLAN that serves as the inside interface to the VPN
Services Module or VPN SPA. It is also the hub endpoint of the
VPN tunnel (unless VRF-Aware IPSec is configured on the device).
If required, click Select to open a dialog box that lists all available
interfaces, and sets of interfaces defined by interface roles, in which
you can make your selection, or create interface role objects. For
more information, see Interface Roles Page, page C-126.