Filter
Top Products
Appendix B Site-to-Site VPN User Interface Reference
Create VPN Wizard
B-24
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Protected Networks Tab
Use the Protected Networks tab on the Edit Endpoints dialog box to edit the
protected networks that are defined on a selected device in the Endpoints table.
You can specify the protected networks as interface roles whose naming patterns
match the internal VPN interface type of the device, as network objects containing
one or more network or host IP addresses, interfaces, or other network objects, or
as access control lists (if IPSec is the assigned technology).
For more information, see:
• Working with Interface Role Objects, page 8-120
• Working with Network/Host Objects, page 8-142
• Working with Access Control List Objects, page 8-32
Navigation Path
You can access the Protected Networks tab from the Edit Endpoints dialog box.
Open the Edit Endpoints Dialog Box, page B-16, then click the Protected
Networks tab.
Peer IP Address To define the IP address of the VPN interface of the peer device,
click one of the following radio buttons:
• VPN Interface IP Address—To use the configured IP address
on the selected VPN interface.
• IP Address for IPSec Termination—To enter manually the IP
address of the peer device. Enter the IP address in the field
provided.
OK button Saves your changes locally on the client and closes the dialog box.
The changes appear in the Endpoints table for the selected
device(s).
Cancel button Closes the dialog box without saving your changes.
Help button Opens help for this tab.
Table B-8 Edit Endpoints Dialog Box > VPN Interface Tab > VPNSM/VPN SPA Settings
Element Description