Filter
Top Products
B-27
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Appendix B Site-to-Site VPN User Interface Reference
Create VPN Wizard
Note Before defining the FWSM settings, you must import your Catalyst 6500/7600
device to the Security Manager inventory. Then open Cisco Catalyst Device
Manager (Cisco CDM), and discover the FWSM configurations on the device, and
assign a VLAN that will serve as the inside interface to the FWSM.
For more information, see:
• Configuring a Firewall Services Module (FWSM) Interface with VPNSM or
VPN SPA, page 9-38
• Discovering Policies, page 6-5
• Creating a Single Layer 3 Ethernet VLAN, page 14-102
Navigation Path
You can access the FWSM tab from the Edit Endpoints dialog box. Open the Edit
Endpoints Dialog Box, page B-16, then click the FWSM tab.
Note Make sure you selected a Catalyst 6500/7600 device in the table on the Endpoints
Page, page B-13 (or tab), before opening the Edit Endpoints dialog box.
Related Topics
• Configuring a Firewall Services Module (FWSM) Interface with VPNSM or
VPN SPA, page 9-38
• Defining VPN Services Module (VPNSM) or VPN SPA Settings, page B-21
• Edit Endpoints Dialog Box, page B-16
Field Reference
Table B-10 Edit Endpoints Dialog Box > FWSM Tab
Element Description
Enable FWSM Settings When selected, enables you to configure the connection between the
Firewall Services Module (FWSM) and the VPN Services Module
(VPNSM) or VPN SPA on the selected Catalyst 6500/7600 device.