Filter
Top Products
Appendix B Site-to-Site VPN User Interface Reference
Create VPN Wizard
B-32
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Dial Backup Settings Dialog Box
Use the Dial Backup Settings dialog box to define optional settings for
configuring a dial backup policy for your site-to-site VPN. These settings are
available for IPSec, GRE, GRE Dynamic IP, or DMVPN technologies.
Process Number Available only if the 2-Box radio button is selected, and if the
selected routing protocol is OSPF.
The routing process ID number that will be used to identify the
secured IGP.
The range is 1-65535.
OSPF Area ID Available only if the 2-Box radio button is selected, and if the
selected routing protocol is OSPF.
The ID number of the area in which the packet belongs. You can
enter any number from 0-4294967295.
Note All OSPF packets are associated with a single area, so all
devices must have the same area ID number.
Next Hop IP Address Available only when a 2-Box solution is selected with static routing.
Specify the IP address of the interface that is connected to the IPSec
Aggregator.
Redistribute Static Route Available only when a 2-Box solution is selected with any routing
protocol other than Static route.
When selected, enables static routes to be advertised in the routing
protocol configured on the IPSec Aggregator towards the PE device.
OK button Saves your changes locally on the client and closes the dialog box.
Note When you select the new or edited hub-and-spoke topology
in the Site-to-Site VPN Manager window, an indication of
VRF-Aware IPSec configuration appears in the VPN
Summary page. See VPN Summary Page, page B-3.
Cancel button Closes the dialog box without saving your changes.
Help button Opens help for this tab.
Table B-11 Edit Endpoints Dialog Box > VRF Aware IPSec Tab (continued)
Element Description