Filter
Top Products
Appendix B Site-to-Site VPN User Interface Reference
Site to Site VPN Policies
B-84
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Navigation Path
Open the Site-to-Site VPN Manager Window, page B-2, select a topology in the
VPNs selector, then select Client Connection Characteristics in the Policies
selector.
Note You can also open the Client Connection Characteristics page from Policy view.
For more information, see Working with Site-to-Site VPN Policies, page 9-55.
Related Topics
• Understanding Easy VPN, page 9-100
• Configuring Client Connection Characteristics for Easy VPN, page 9-109
Field Reference
Table B-29 Easy VPN Remote > Client Connection Characteristics Page
Element Description
Mode
Client Select if you want the devices on the router’s inside networks to
form a private network with private IP addresses. NAT and PAT will
be used. Devices outside the LAN will not be able to ping devices
on the LAN, or reach them directly.
Network Extension Select if you want the devices connected to the inside interfaces to
have IP addresses that are routable and reachable by the destination
network. The devices at both ends of the connection will form one
logical network. PAT will be disabled, allowing the hosts at both
ends of the connection to have direct access to each other.
Save button Saves your changes to the server but keeps them private.
Note To publish your changes, click the Submit button on the
toolbar.
Close button Closes the Site-to-Site VPN window.
Help button Opens help for this page.