Filter
Top Products
B-53
User Guide for Cisco Security Manager 3.0.1
OL-8214-02
Appendix B Site-to-Site VPN User Interface Reference
Site to Site VPN Policies
Preshared Key Page
Use the Preshared Key page to view or edit the parameters for a preshared key
policy.
For information about Preshared Key policies, see Understanding Preshared Key
Policies, page 9-74.
Note A preshared key policy is not available when configuring Easy VPN.
Enable Split Tunneling When selected (the default), enables you to configure split tunneling
in your VPN topology.
Split tunneling enables you to transmit both secured and unsecured
traffic on the same interface. Split tunneling requires that you
specify exactly which traffic will be secured and what the
destination of that traffic is, so that only the specified traffic enters
the IPSec tunnel, while the rest is transmitted unencrypted across
the public network.
Enable Spoke-to-Spoke
Connectivity through the Hub
Supported on PIX 7.0 and ASA devices.
When selected, enables direct communication between spokes in a
hub-and-spoke VPN topology, in which the hub is an ASA/PIX 7.0
device.
Enable Default Route Supported on Cisco IOS routers and Catalyst 6500/7600 devices.
When selected, the device uses the configured external interface as
the default outbound route for all incoming traffic.
Save button Saves your changes to the server but keeps them private.
Note To publish your changes, click the Submit button on the
toolbar.
Close button Closes the Site-to-Site VPN window.
Help button Opens help for this tab.
Table B-18 VPN Global Settings Page > General Settings Tab (continued)
Element Description