Filter
Top Products
SNMS
Installing SNMS 2-13
Step 2 Click Done when you are ready to start the next step of the software configuration
process.
The ICW screen appears and displays the word completed after Step 2: Add File System.
Step 3 Click Next to begin Step 3: Add Library.
The Library Introduction screen appears (see Figure 2-9).
The Add Library wizard configures one or more tape libraries.
Figure 2-9 Library Introduction
Step 1 Click Next to continue through all the screens for the Add Library wizard.
Adding Libraries
NOTE
On the Library Introduction screen, fabric-attached libraries should be
configured as SCSI libraries.