Filter
Top Products
SNMS
Installing SNMS 2-25
mkdir -p <mount point>
chmod 777 <mount point>
Step 5 Add the following line to the /etc/vfstab file to enable automount after reboot.
<file system name> - <mount point> cvfs - auto verbose=yes
The file system name is the name that you created when you configured the SNMS
software using the ICW Add File System wizard. (Refer to the
Adding File Systems
section of this document for more information.)
Use the following procedure to install the SNMS client software in a Linux operating system.
Step 1 Log on as root.
This allows you to perform the installation without having permission problems.
Step 2 Install the client software.
tar xvf <filename>
rpm -ivh <client package name>
Step 3 Enable the chkconfig levels to start automatically on reboot.
chkconfig --level 3456 cvfs on
Step 4 Make sure the /<usr>/cvfs/config/fsnameservers file contains the name of your
server machine.
Step 5 Create the mount points for the file systems.
mkdir -p <mount point>
chmod 777 <mount point>
NOTE
To mount a file system manually, type the following at the command prompt.
mount -F cvfs <file system name> <mount point>
Installing on Linux