Filter
Top Products
SNMS
Installing SNMS 2-23
Use the following procedure to install the SNMS client software in a Windows operating system.
Step 1 Double-click the downloaded file system icon (for example, n32d408.exe) from the
location where you saved the file on your machine.
Step 2 Follow the instructions on the screens in the Windows InstallShield Wizard.
Step 3 Once installation is complete, click Finish and reboot your system.
Use the following procedure to install the SNMS client software in an SGI IRIX operating system.
Step 1 Log on as root.
This allows you to perform the installation without having permission problems.
Step 2 Install the client software.
tar xvf <filename>
inst -f .
Inst> go
Inst> quit
Step 3 Enable the StorNext File System to start automatically on reboot.
chkconfig cvfs on
chkconfig verbose on
Installing on Windows
WARNING:
On the Choose Options to Complete the Installation screen, do NOT
select the option to Label my StorNext File System Disk Devices
check box. During the initial installation of the SNMS software, the
disks have already been labeled during server setup. If you re-label
your operating system disk, you will have to completely rebuild your
machine or restore it using an operating system backup.
Installing on SGI IRIX