Filter
Top Products
El ec tr ic Fryer Op er at io n & Ca re M an ua l • 19
O P E R A T I O N
FILTER CLEANING & MAINTENANCE
NOTE:
Make certain to use hand protection when
working with hot surfaces.
R E US A B LE M E SH F I LT ER O P T IO N :
Clean the reusable mesh filter (FI-27014) by
spraying thoroughly with hot water. DO NOT clean
in the dishwasher. DO NOT use detergents to clean.
Detergents and detergent residues will significantly
reduce the life of oil and shortening products.
Make certain the filter is performing efficiently by
inspecting the filter each time it is cleaned.
Examine for cuts and holes. For the best results,
replace the filter whenever necessary.
Make certain the filter is securely fastened to the
support basket before returning the assembly to
the trolley.
To discard deteriorated oil/shortening, the trolley
can be pulled from the fryer and can be rolled to a
convenient location for use with a pumping device.
ALWAYS MAKE CERTAIN THE TROLLEY IS
PROPERLY POSITIONED BENEATH THE
FRYER BEFORE OPERATION.
C A U T I O N
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
OIL FILTRATION INSTRUCTIONS (FOR UNITS WITH INSTALLED OPTION)
C A U T I O N
A WORN FILTER WILL AFFECT
PRODUCT FRYING RESULTS.
C A U T I O N
TO PREVENT FILTER DAMAGE, DO NOT USE SHARP
IMPLEMENTS TO REMOVE SCRAPS FROM THE FILTER.
W A R N I N G
TO AVOID PERSONAL INJURY, USE
CAUTION WHEN SURFACES BECOME
SLIPPERY DUE TO SPILLED OR
DRIPPING OIL.