Filter
Top Products
17
HINTS & TIPS
CAUTION
DO NOT REMOVE BLADES UNLESS
ABSOLUTELY NECESSARY.
Removing the Blade Assembly: Turn the
blender jug upside down and grip firmly.
Insert Blender inner measuring cap in
grooves of blade assembly and rotate
counter-clockwise to loosen plastic retainer
nut. Carefully remove blade assembly by
lifting straight out using a cloth or towel to
protect your hands.
Replacing or Tightening Blade Assembly:
Using a cloth or towel to protect your hands
carefully grip the blade assembly and insert
into blender jug pressing down firmly until
you feel the blades lock into place. Place
plastic retainer nut on and hand tighten by
turning clockwise. Carefully turn clockwise
with inner measuring cap until secure. Do
not force.
NOTE
Holding blades with a cloth or towel will
prevent the blades from moving during
tightening.
WARNING
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands. Use caution when handling
and storing.
BBL420XL_IB_C11_FA.indd 17 19/08/11 1:35 PM