Filter
Top Products
4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating the Breville Hemisphere
™
Mini
for the first time and save for future
reference.
• Remove and safely discard any
packaging material and promotional
labels before using the blender for the
first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this appliance.
• Do not place the blender near the
edge of a counter-top or table during
operation. Ensure the surface is level,
clean and free of water and other
substances. Vibration during operation
may cause the appliance to move.
• Do not use the blender on a sink
drain board.
• Do not place the blender on or near a hot
gas or electric burner, or where it could
touch a heated oven.
• Handle the blender and attachments
with care – remember the blades are
razor-sharp and should be kept out of
the reach of children.
• Care shall be taken when handling the
sharp cutting blades, emptying the bowl
and during cleaning.
• Always ensure the blender is
completely assembled before operating.
The blender will not operate unless
properly assembled.
• Do not use attachments other than those
provided with the blender.
• Do not attempt to operate the blender by
any method other than those described
in this booklet.
• Always secure the blade assembly onto
the blender jug before attaching to the
motor base.
• Ensure the Variable Speed dial is in the
‘OFF’ position and the power cord is
unplugged before attaching the blender
jug.
• Always operate the blender with the
blender jug lid in position.
• Keep fingers, hands, knives and other
utensils away from moving blades.
• Do not place hands or fingers into
the blender jug unless the motor and
blades have come to a complete stop.
Ensure the Variable Speed dial is in the
‘OFF’ position and the power cord is
unplugged before removing the lid from
the blender.
• Ensure the motor and the blades
have completely stopped before
disassembling. Ensure the Variable
Speed Dial is in the ‘OFF’ position and
the power cord is unplugged from the
power outlet before attempting to move
the blender, when not in use, if left
unattended and before disassembling,
cleaning or storing.
• Care should be taken when removing
the food from the blender jug by
ensuring the motor and the blades
have completely stopped before
disassembling. Ensure the Variable
Speed Dial is turned to the ‘OFF’
position and unplugged, before
removing the lid from the blender jug.
The blender jug should then be removed
from the motor body and the food
carefully removed before attempting to
remove the blade assembly.
IMPORTANT SAFEGUARDS
BBL420XL_IB_C11_FA.indd 4 19/08/11 1:35 PM