Filter
Top Products
19
1
SELECT
ENTER
Press and hold SELECT (a) for 5 seconds to
get to the TEMP SET screen. Press the
SELECT (b) button to move the cursor to
point at SETUP, then press the
ENTER (c)
button.
SETTING THE DATE AND TIME
SELECT
ENTER
SET CLOCK/CALENDAR
MON DA/YR HR.MN.SC
xxx xx/xx xx.xx.xx
Exit
2
SCO
SELECT
ENTER
Press the SELECT (a) button to move the
arrow to the CLOCK selection. Press the
ENTER (b) button.
3
Use the UP/DOWN (a) arrows to set the date.
Press the SELECT (b) button to move the
cursor from month/day to time. Set the time
using the UP & DOWN arrows.
SELECT
ENTER
Left WHOPPR 01:50
Center CHICKN 03:45
Right CHICKN 03:45
FLX XXXX
F MAIN XXXXF
4
When finished making changes, press
ENTER (a) to save your changes and return
to the normal run screen.
a
a, b
a
b
a
ACTUAL SET
MAIN xxxxF 0500F
FLEX xxxxF 0500F
SETUP EXIT
c
PARAMETERS TEST
FEEDER DROP CLOCK
SPEED CALIBRATION
EXIT
→
b
→
Nieco Corporation - Model 9025