Filter
Top Products
33
Monthly
Top
Main Chamber Upper Burners (4) - P/N 10590
Reassemble
27
Disassemble
Clean
Brush with
surface
facing down
DO NOT USE
WATER
Lift burner to dislodge; inspect for holes in
screens; replace burner if necessary
CAUTION: BURNERS MUST BE COOL
5
Put end with tube facing
outside frame; fit hole end into
place and set down
Make sure burner is engaged
in support
Nieco Corporation - Model 9025
Monthly
Top
Shrouds (2) - MAIN P/N 11706/FLEX P/N 11704
Reassemble
26
Disassemble
Clean
a. Wash
b. Scrub
c. Rinse
d. Sanitize
Lift from broiler
6
Place shroud properly on broiler
Check that the wide shroud is on
the main side and the narrow
shroud is on the flex side of the
broiler
Main Side
(Wide Shroud)
Flex Side
(Narrow Shroud)