Filter
Top Products
40
Return chain jams ❏ Remove any obstruction if needed
❏ Press the black reset button located on the
left (MAIN CHAMBER) side of the broiler
control box (underneath).
❏ Check the motor drive chain (bicycle chain)
for any obstructions or jams
Product not cooking to
proper temperature in
cookouts
❏ Use proper cookout procedures per OPS
Manual (12/00)
❏ Adjust cook time
❏ Check that broiler is calibrated properly
❏ Check that all burners are lit
❏ Check that all parts are installed correctly,
and that lower burner holes are facing up
❏ If on the flex chamber, inspect elements for
rough spots or damage
❏ If flex chamber; check that electric elements
are heating:
__ Select WHOPPER
®
setting for chain
(right or center)
__ After 2 minutes observe top elements
and verify that front and back
elements are glowing. If glowing,
elements are operating properly,
check parts assembly.
If not glowing, call service
❏ Check that broiler is properly cleaned and
assembled
❏ Check ventilation
__ Make sure there isn’t excessive
exhaust or an air vent blowing on the
broiler
Problem Solution
Nieco Corporation - Model 9025
No display on
computer control
keypad
❏ If there is no text displayed on the keypad
but the backlighting is on, check the
connection at the keypad
❏ Call service if necessary
Alternative display
shown on computer
control keypad
❏ Depress select button on the keypad to
change view