Filter
Top Products
23
Feed End
Main Chamber Ash Scraper Tray P/N 11014
Reassemble
7
Disassemble
Clean
a. Wash
b. Scrub
c. Rinse
d. Sanitize
Pull out
23
Push in place and secure over
channel
Feed End
Front Hood Shield (NOT A NIECO PART)
Reassemble
6
Disassemble
Clean
Wipe down
front and
back surface
Lift, pull off
24
If hinged shield; swing shield up
Secure in place with rod to hood frame
Lift up into exhaust hood; set
down to lock in place
If hinged shield -
Release rod from hood frame
Close hood shield
Lock lever
Nieco Corporation - Model 9025