Filter
Top Products
27
Discharge End
Stripper Blades (2) - MAIN P/N 10857/FLEX P/N 10856
Reassemble
15
Disassemble
Clean
a. Wash
b. Degrease
c. Scrub
d. Rinse
e. Sanitize
Tilt away from chain; lift off brackets
16
Put blade notches on
supports on broiler
Make sure blade is not hooked
on upper grease pan or burners
and that it swings freely
Incorrect
Discharge End
Return Slides (2) - MAIN P/N 11495 (CENTER DIVIDER P/N 11493)/FLEX P/N 11497
Reassemble
14
Disassemble
Clean
a. Wash
b. Degrease
c. Scrub
d. Rinse
e. Sanitize
Pull up and out
17
Place bracket over broiler
crossbar; set down
Make sure slide is on correct
chamber
Position
center guide
on pan
Incorrect
Nieco Corporation - Model 9025