Filter
Top Products
25
Feed End
Feed End Ash Scraper Blades (2) - MAIN P/N 11016/FLEX P/N 11015
Reassemble
11
Disassemble
Clean
a. Wash
b. Degrease
c. Scrub
d. Rinse
e. Sanitize
Lift off pins and pull out
20
Replace back under top
chains; put notches on pins
Weekly
✗ Make sure part swings freely
Feed End
Feed End Grease Troughs (2) MAIN P/N 11540/FLEX P/N 11542
Reassemble
10
Disassemble
Clean
a. Wash
b. Degrease
c. Scrub
d. Rinse
e. Sanitize
Lift up and out
21
Hook in the slot
Nieco Corporation - Model 9025