Filter
Top Products
Cold Drink Center (327/328) Operator’s Guide
3280020 Page 25 August, 2003
SET TALKER MODE
(Supervisor Mode Only)
1. Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2. Press , then until the display shows or
3. Press to turn the talker option ON or OFF.
NOTE
Talker hardware must be installed for this to work.
SET PRINTER OR DEX MODE
(Supervisor Mode Only)
1. Follow the steps in "Gain Access To The Supervisor Mode" on page 23.
2. Press , then until the display shows:
- means that data will be sent directly to a printer,
- data remains in memory after it is downloaded into a portable
data collection device (PDCD),
- resettable data is cleared after it is downloaded into a PDCD.
- a special DEX option. All sales data will become non-resettable.
Consult your DEX supplier before choosing this option.
3. Press to change between the three choices.
4. CONTINUE.