Filter
Top Products
Cold Drink Center (327/328) Operator’s Guide
August, 2003 Page 28 3280020
SELECT BILL VALIDATOR AND OPTIONS
1. Press , then press until one of the following is displayed:
1. Press to choose the desired option.
2. CONTINUE.
- No bills will be accepted or there is no bill validator installed
(you can exit the function).
- The serial bill validator is selected and will accept $1, $2,
$5, $10, and $20 bills. Use BILL SELECTION METHOD
below to change the bills that will be accepted.
- The pulse bill validator will accept $1 bills.
- A standard MDB bill validator is selected. It will accept $1,
$2, $5, $10 and $20 bills. Use BILL SELECTION METHOD
below to change the bills that will be accepted.
- An MDB bill validator that accepts non-standard bills or
tokens is connected and operating. Press to enter
list of bills. See "Initial Setup Of NonStandard Bill Valida-
tor" on page 29.
BILL SELECTION METHOD:
The standard $1, $2, $5, $10 and $20 bills are enabled by pressing the 1, 2, 5, 6,
or 7 key(s), respectively, to display which bill(s) will be accepted.