Filter
Top Products
Cold Drink Center (327/328) Operator’s Guide
3280020 Page 29 August, 2003
INITIAL SETUP OF NONSTANDARD BILL VALIDATOR
1. Connect the bill validator, and follow the steps in "Select Bill Validator and
Options" on page 28, to select in the bill validator selection
screens. <*> will not be an option yet. Exit the bill validator setup by
pressing
. Bill information is now collected from the validator.
2. Press , then press until <*> displays.
3. Press . will display. The first number ( ) indicates bill
validator channel 1, the is the bill denomination, and indicates that
the validator will accept $1.00 bills.
4. Press to toggle the bill acceptance or .
5. Press and to scroll through the list of other denominations
and to set them to or .
6. Press to move up to the top level screen.
NOTE
If a denomination does not display in the scroll list of available
denominations, check the binary switch settings for the
validator. If the binary switch for a given denomination is set to
“off”, it will not display in the list of denominations.
7. CONTINUE.