Filter
Top Products
Cold Drink Center (327/328) Operator’s Guide
3280020 Page 41 August, 2003
ASSIGN CUP SIZES TO SELECTIONS
(Supervisor Mode Only)
You can load up to two different sizes of cups in your machine (see "Set Up Cup
Sizes" on page 35). You may not always want a certain selection to use all of the
cup sizes in your machine.
1. Press , then until the display shows something like this:
. This display means that the smaller of the two cup sizes ( ) is
available for all selections (A - F).
2. Press the appropriate letter to toggle the display on or off. A selection that
doesn't vend the displayed size cup has its letter replaced by a blank space.
NOTE
Press to display all selections; press to clear all selections.
3. Press to display remaining selections.
NOTE
If you have only one cup size in your machine, you will not see
the next display.
4. Press . The display shows something like this:
. This display means that the larger of the two cup sizes ( ) is avail-
able for all selections (A - F).
5. Press the appropriate letter to toggle the display on or off. A selection that
doesn't vend the displayed size cup has its letter replaced by a blank space.
NOTE
Press to display all selections; press to clear all selections.
6. Press to display remaining selections.
To vend a cup only, press 1, 2, 3 (large size) or 2, 3 (regular size).
7. CONTINUE.