Filter
Top Products
19
Never extract the water tank while the machine is delivering coffee. If it is removed, it will not
be possible to make the coffee and the appliance will display “GROUND TOO FINE ADJUST
MILL AND PRESS OK” and then “FILL TANK”. Check the level of water in the tank and replace in
the appliance. To turn the machine on again, press the OK icon (B9). “HOT WATER PRESS OK” is
displayed. Press the OK icon (B9) within a few seconds and deliver water from the cappuccino
maker for about 30 seconds. When delivery stops, the basic modes are displayed again.
Note: The coffee maker may request the operation to be repeated a number of times until the air
is completely elminated from the hydraulic circuit.
Note: if this operation is not performed correctly or if the machine is turned off, the basic modes
may be displayed, although the problem is in fact still present.
Changing the quantity of coffee in the cup
The appliance is set by default to automatically
make the following types of coffee:
espresso
small cup
medium cup
large cup
mug
To change the quantity, proceed as follows:
1
Press the icon (B2) to enter the menu (fig. 15). Press the icons (B7) and (B8) (fig. 2) until
“PROGRAM COFFEE” is displayed.
2
Press the OK icon (B9).
3
Select the type of coffee you want to change by pressing the icons (B7) and (B8).
4
Press the OK icon (B9) to confirm the type of coffee you want to make.
5
Use the icons (B7) and (B8) to change the quantity of coffee. The progress bar shows the
quantity of coffee selected.
6
Press the OK icon (B9) again to confirm (or the ESC icon (B6) to cancel the operation).
7
Press the ESC icon (B6) (fig. 18) twice to exit the menu.
The appliance is now reprogrammed with the new settings and is ready.
Adjusting the coffee mill
The coffee mill is preset in the factory and should not require adjusting. However, if after making
the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can
be corrected by adjusting the grinding adjustment knob (fig. 14).
Important!
The grinding adjustment knob must only be turned when the coffee mill is in
operation.
For slower delivery and creamier coffee, turn one click anticlockwise (finer pre-ground coffee).
For faster delivery (not a drop at a time), turn one click clockwise (coarser pre-ground coffee).
Making co ee using co ee beans
EN