Fisher & Paykel EB60DSXB Coffeemaker User Manual


 
7
Installation instructions
Built-in installation
Verify the minimum measurements required for correct installation of the appliance.
The coffee maker must be installed in a column and the column must be firmly fixed to the wall
with commercially available brackets.
Important!
All installation or maintenance operations must be performed with the appliance disconnected
from the mains electricity supply.
Kitchen furniture in direct contact with the appliance must be heat resistant (65°C min).
To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements in
figure).
Note:
If you are installing an appliance directly over another, you have the option of using a black
metal shelf cover to conceal the shelf front that would be visible between the two appliances.
This can be purchased as a separate accessory and needs to be fitted before the lower grill kit
and/or appliance is installed. Refer to the instructions packed with the shelf cover accessory kit.
361 mm
528 mm
372 mm
30 mm
EN