Filter
Top Products
28
Descaling
Important!
Failure to descale the appliance regularly voids the warranty.
Descaler contains acids. Respect the safety warnings provided by the manufacturer and given on
the descaler pack.
Use the descaler recommended by the manufacturer only. Use of other descalers voids the
warranty. Failure to descale the appliance as described also voids the warranty.
Before descaling, make sure the water softener filter has been removed.
When “PLEASE DESCALE !” is displayed, the machine requires descaling.
Proceed as follows:
1
Make sure the machine is ready;
2
Press the icon (B2) to enter the menu and then the icons (B7) and (B8) until “DESCALE”
is displayed.
3
Press the OK icon (B9) and the appliance displays “DESCALE PLEASE CONFIRM”.
4
Press the OK icon (B9). The message “ADD DESCALER PLEASE CONFIRM” is displayed.
5
Empty the tank of water, pour the contents of the descaler bottle into the tank respecting the
instructions given on the descaler pack, then add water up to the MAX level marked on the
water tank. Position a container with a capacity of about 2 litres under the hot water spout.
6
Press the OK icon (B9). Descaler flows out of the hot water spout into the container below.
The appliance displays: “DESCALING”.
7
The descale programme automatically performs a series of deliveries and pauses.
8
After about 30 minutes “DESCALE COMPLETE PLEASE CONFIRM” is displayed.
9
Press the OK icon (B9). “RINSING PLEASE CONFIRM” is displayed.
10
Empty the water tank, rinse to eliminate descaler residues, then fill with clean water.
11
Replace the tank full of clean water. “RINSING PLEASE CONFIRM” is displayed again.
12
Press the OK icon (B9) again. Hot water flows out of the spout into the container below and
“RINSING” is displayed.
13
Wait until “RINSING COMPLETE PLEASE CONFIRM” is displayed.
14
Press the OK icon (B9). “DESCALE COMPLETE” is displayed, then “FILL TANK”. Fill the tank again
with clean water.
15
The descale programme is now terminated and the appliance is ready to make coffee again.
Note: If descaling is interrupted before completion, the process must be begun again from the
beginning.
Resetting default values (reset)
It is possible to reset all the settings to their default values. Proceed as follows:
1
Press the icon (B2) to enter the menu and then the icons (B7) and (B8) until “RESET TO
DEFAULT” is displayed.
2
Press the OK icon (B9) and the appliance displays “RESET TO DEFAULT PLEASE CONFIRM”.
3
Press the OK button (B9) to reset the default values.
Changing and setting menu parameters
EN