Filter
Top Products
32
Troubleshooting
Problem Possible causes What to do
The coffee is not hot.
The cups were not preheated.
The brewing unit has cooled
down because 2/3 minutes
have elapsed since the last
coffee was made.
The temperature set is too
low.
Warm the cups by rinsing
them with hot water.
Before making coffee,
preheat the brewing unit
by selecting the RINSING
function in the menu.
Change the set temperature
(see section ‘Changing and
setting menu parameters’).
The coffee is not creamy
enough.
The coffee is ground too
coarsely.
Wrong type of coffee.
Turn the grinding
adjustment knob one click
anticlockwise towards “1”
while the coffee mill is in
operation (fig. 11).
Use a type of coffee for
espresso coffee makers.
The coffee is delivered
too slowly or a drop at a
time.
The coffee is ground too finely.
Turn the grinding adjustment
knob one click clockwise
towards “7” while the coffee mill
is in operation (fig. 11).
Continue one click at a
time until coffee delivery is
satisfactory. The effect is only
visible after delivering two
coffees.
The coffee is delivered
too quickly.
The coffee is ground too coarsely. Turn the grinding adjustment
knob one click anticlockwise
towards “1” while the coffee mill
is in operation (fig. 11).
Avoid turning the grinding
adjustment knob excessively
otherwise when you select
2 cups, the coffee may be
delivered a drop at
a time. The effect is only visible
after delivering two coffees.
Coffee does not come out
of one of the spouts.
The spouts are blocked. Clean the spouts with a
toothpick (fig. 23).
EN